New Products: Munson batch mixer blends dry solids with liquid additions

UTICA, N.Y.—A new Munson Rotary Batch Mixer allows uniform distribution of liquid additions to dry bulk solids in trace amounts to large volumes within one to three minutes.

Model 700-TH-140-SS includes an integral spray line. Proprietary mixing flights of the rotating drum tumble, turn, cut and fold material, providing free space between particles, which recombine 288 times per minute, the company said. The flow pattern allows liquid additions to be sprayed over a wide expanse of moving material, yielding a batch uniformity of greater than or equal to 99.9 percent.

The mixer is intended for dry bulk blending with or without the addition of coatings, flavorings, vitamins or other liquids to food products; or active ingredients in liquid form to any bulk solid chemical or mineral.

It is equipped with a sliding intake chute which, together with twin doors on opposite sides of the mixing vessel, provide rapid access to the entire interior, intake spout and seal area for cleaning, sanitizing and visual inspection of all material contact surfaces.

In addition to blending, the flights direct material toward and through a stationary, pneumatically-actuated plug gate valve for total discharge, eliminating residual that would otherwise be wasted or require manual removal prior to cleaning.

The rotating drum is supported by two oversized trunnion rings that ride on heavy-duty alloy roller assemblies, providing long life with minimal maintenance. The design eliminates the need for an internal shaft with seals contacting material. To contain dust, the machine has one seal at the inlet, which is mounted externally to allow rapid, inexpensive replacement, according to the company.

For information contact Munson Machinery Company Inc. by phone at 800-944-6644 or email at [email protected]. More information is available at munsonmachinery.com.

The New Products blog showcases innovations suppliers are introducing to the rubber industry. It focuses on new materials, machinery, molds, testing equipment, software, and other goods and services that are intended to help manufacturers of finished rubber products. The blog will appear on Tuesdays and Thursdays. To have your product considered for the blog, contact Online Content Editor Erin Pustay Beaven at [email protected] or Editor Bruce Meyer at [email protected].