OEM vacuum molding press aids in push-through loading

OEM Press Systems Inc. has designed a vacuum molding press to facilitate push-through loading and unloading. It features automatic vertically traversing vacuum doors, which index vertically to allow access to the press platens. The press platens are uniformly thermal fluid heated across the mold area, at steady state, measured out within 2°F. Call Mary Quinlan at 714-457-2245 or visit www.oempresssystems.com for more information.

Advanced Polymer Alloys, a division of Ferro Corp., has published two guides on its melt-processible elastomers. "Guide to Overmolding with MPEs" is a 10-page report offering tips on how to achieve stronger bonds when overmolding to thermoplastic substrates using insert injection and two-shot molding. The second publication is titled "Fuel Immersion Data," covering the firm´s products, including Alcryn and DuraMax TPV. To receive the guides, visit www.APAinfo.com or call 1-888-663-6005.

Sealant Equipment & Engineering Inc.´s Servo-Flo 801-HV is a positive-displacement, two-component meter-mix dispensing system designed to apply small precision beads and small metered shots of precisely mixed resins. It can dispense materials for part configurations in batch or random processes, the firm said. Its disposable mixers dispense most two-component materials, including epoxies, polyurethanes, silicones and acrylics. Call Nick Schultz at 734-459-8600 or visit www.sealantequipment.com.