SPONSORS
|
2006 Papers
(Click on name to get bio; click on title to get abstract)
Tuesday, September 12th 2006
Paper 1A - 8:40 AM to 9:00 AM
TIRE AGING UPDATE
John M. Baldwin, Ph.D.
Ford Motor Company
Paper 1B - 8:40 AM to 9:00 AM
RUBBER NANOCOMPOSITES FOR TIRE APPLICATIONS (ORAL ONLY)
Lloyd A. Goettler, Ph.D.
The University of Akron (retired from)
Paper 2A - 9:00 AM to 9:20 AM
TIRE SERVICE LIFE: RESULTS FROM AN RMA STUDY OF SCRAP TIRES
Laurie Baulig, Esq.
Rubber Manufacturers Association
Paper 2B - 9:00 AM to 9:20 AM
PERFORMANCE ENHANCEMENT IN RUBBER BY MODERN FILLER SYSTEMS
Werner Niedermeier, Ph.D.
Degussa AG
Paper 3A - 9:20 AM to 9:40 AM
PHOENIX, ARIZONA TIRE DATASET OVERVIEW(ORAL/POWERPOINT)
Riley Garrott, Ph.D.
NHTSA
Paper 4A - 9:40 AM to 10:00 AM
THE IMPORTANCE OF TIRE TREAD DEPTH AND PLACEMENT FOR WET TRACTION
William Blythe, Ph.D.
William Blythe, Inc.
Paper 5A - 10:00 AM to 10:20 AM
NITROGEN TIRE INFLATION FOR THE GENERAL MARKET
Robin Pearl
Nitrogen Inflation Association
10:00 AM to 10:45 AM
SPECIAL PRESENTATION: AN OVERVIEW OF VIETNAM TIRE INDUSTRY--A FUTURE DESTINATION FOR TIRE MANUFACTURERS
Thi Thuy Hoa Tran, Ph.D.
Vietnam Rubber Association
11:15 AM to 12:00 PM
KEYNOTE ADDRESS
Maurizio Boiocchi
Pirelli Pneumatici SpA
12:30 PM to 1:30 PM
PEER REVIEW: THE IMPORTANCE OF TIRE TREAD DEPTH AND PLACEMENT FOR WET TRACTION, BY WILLIAM BLYTHE
William Blythe, Ph.D.
William Blythe, Inc.
Paper 8A - 1:50 PM to 2:10 PM
A NEW PARADIGM FOR TIRE OXIDATION AND FORENSIC ANALYSIS
Sean Boyle
Tire Stamp, Inc.
Paper 8B - 1:50 PM to 2:10 PM
NEW LABORATORY METHODS FOR MECHATRONIC DEVELOPMENT AND VALIDATION
Paul Nave
MTS Systems Corporation
Paper 9A - 2:10 PM to 2:30 PM
LASER ENGRAVING DOT CODES, INDIVIDUAL SERIAL NUMBERS AND MORE—ANSWERS TO THE TREAD ACT AND IMPROVED TIRE TRACEABILITY
Jorg Jetter
JET Lasersysteme
Paper 9B - 2:10 PM to 2:30 PM
THE PERFORMANCE OF MULTIFUNCTIONAL ACRYLATES AS ANTI-REVERSION AGENTS
Steven Henning
Sartomer Company, Inc.
Paper 10A - 2:30 PM to 2:50 PM
THE SINGLE TEST SOLUTION FOR RUBBER MIXING IN THE TIRE INDUSTRY
Paper 10B - 2:30 PM to 2:50 PM
A HIGHLY PROCESSABLE LOW UNSATURATION EPDM FOR INNER TUBE APPLICATIONS
Herman Dikland, Ph.D.
DSM Elastomers
Paper 11A - 2:50 PM to 3:10 PM
CURRENT STATE OF THE ART FOR FULLY AUTOMATIC X-RAY INSPECTION OF TIRES
Jason Robbins
YXLON International Inc.
Paper 11B - 2:50 PM to 3:10 PM
USING PRE DISPERSED RESIN CURE PACKAGES TO IMPROVE BLADDER LIFE
Steven Monthey
Rhein Chemie
3:10 PM to 3:30 PM
BREAK
Paper 12A - 3:30 PM to 3:50 PM
ELECTRON MICROSCOPY TECHNIQUES IN THE TIRE INDUSTRY
Vern Robertson
JEOLusa, Inc.
Paper 12B - 3:30 PM to 3:50 PM
NEW LASER LINE TECHNOLOGY FOR SIDEWALL INSPECTION AND DETECTION OF THE SMALLEST DEFECTS
Paper 13A - 3:50 PM to 4:10 PM
TWO IN ONE--A MODERN UNIVERSAL FLEXOMETER AND A DYNAMIC MECHANIC THERMAL SPECTROMETER
Horst Deckmann, Ph.D.
GABO QUALIMETER Testanlagen GmbH
Paper 13B - 3:50 PM to 4:10 PM
NEW OPTICAL MEASURING TECHNIQUE TO DETECT STRUCTURAL AND GEOMETRIC ANOMALIES IN A TIRE
Stefan Dengler
SDS Systemtechnik GmbH
Paper 14A - 4:10 PM to 4:30 PM
BASICS OF AIRCRAFT TIRE DESIGN
Robert Robson
Goodyear Tire & Rubber Company
Paper 14B - 4:10 PM to 4:30 PM
THE "RAM POSITION INDICATOR" FOR BATCH MIXERS
Frank Borzenski
Farrel Corporation
Paper 15A - 4:30 PM to 4:50 PM
SPECIAL SILENT TECHNOLOGY FOR RADIAL PASSENGER TIRES
Naoki Yukawa
Sumitomo Rubber Industries Ltd.
Paper 15B - 4:30 PM to 4:50 PM
MODULAR TIRE MANUFACTURING
Kees Janszen
VMI Americas Inc.
Wednesday, September 13th 2006
Paper 16A - 8:30 AM to 8:50 AM
SETTING PASSENGER/LIGHT TRUCK TIRE INSPECTION CONDITIONS GUIDELINES FOR DEALERS - Session 1
Marvin Bozrath
Tire Industry Association (TIA)
Paper 16B - 8:30 AM to 8:50 AM
ANTI-DEGRADANTS IN RUBBER COMPOUNDS: WHERE ARE THEY?
Paper 17A - 8:50 AM to 9:10 AM
SETTING PASSENGER/LIGHT TRUCK TIRE INSPECTION CONDITIONS GUIDELINES FOR DEALERS - Session 2
Marvin Bozrath
Tire Industry Association (TIA)
Paper 17B - 8:50 AM to 9:10 AM
STRUCTURAL IMPACT DAMAGE UNDER VARYING LABORATORY CONDITIONS
Gary Bolden
Standards Testing Laboratories (STL)
Paper 18A - 9:10 AM to 9:30 AM
A NEW TIRE/WHEEL BALANCING METHODOLOGY BASED UPON ABSOLUTE FORCE CALCULATIONS
David Scribner
Hunter Engineering
Paper 18B - 9:10 AM to 9:30 AM
BELT-LEAVING-BELT RUBBER TEAR SURFACE MORPHOLOGIES: WIRE FILAMENT TWIST EFFECTS
Ronald W. Smith
RWS Consulting
Paper 19A - 9:30 AM to 9:50 AM
CONSUMERS ON THE INTERNET: WHY YOU SHOULD PAY ATTENTION
Sue MacDonald
Nielsen BuzzMetrics
Paper 19B - 9:30 AM to 9:50 AM
EFFECT OF NITROGEN PURITY ON THE OXIDATION OF BELT COAT COMPOUND
Uday Karmarker, Ph.D.
Akron Rubber Development Laboratory (ARDL)
Paper 20A - 9:50 AM to 10:10 AM
BLOGS: WHAT ARE THEY, WHO’S WRITING THEM, AND WHY SHOULD TIRE MANUFACTURERS PAY ATTENTION?
Bill Stephenson
Nielsen BuzzMetrics
Paper 20B - 9:50 AM to 10:10 AM
REVIEW DISCUSSION: NITROGEN INFLATION EFFECT ON TIRE OXIDATION/DISCUSSION OF STATISTICAL DESIGN AS USED IN PAPER 19B
Uday Karmarker, Ph.D.
Akron Rubber Development Laboratory (ARDL)
Paper 21B - 10:10 AM to 10:30 AM
ON THE IRREGULAR WEAR OVER TREAD BELT SEPARATIONS
John Daws, Ph.D.
Daws Engineering
10:30 AM to 11:15 AM
BREAK-OUT SESSION: INTERNET COMMUNICATION--WHAT CONSUMERS ARE SAYING ONLINE
Helen Gaitanis
Nielsen BuzzMetrics
12:30 PM to 1:30 PM
OPEN DISCUSSION WITH EXPERTS DEALING WITH SIGNIFICANCE OF TIRE FAILURE TEAR PATTERNS AND LAMINATE FRACTURE AS INDICATORS OF CAUSE OR DISABLEMENT/ACCELERATED WEAR RATE OVER BELT DELAMINATION
| Author: | John Daws, Ph.D.,
Daws Engineering |
| Co-authors: |
Gary Bolden, Standards Testing Laboratories (STL)
Jean-Claude Brico, Forensic Tire Expertise LLC
Gary Hamed, The University Of Akron, Polymer Science Dept., Rubber Research Center
James D. Rancourt, Ph.D., Polymer Solutions Inc.
Ronald W. Smith, RWS Consulting
|
Paper 22A - 1:50 PM to 2:10 PM
LOCATING PATENT INFORMATION ON THE INTERNET
Chris Laursen
Rubber Division, ACS
Paper 22B - 1:50 PM to 2:10 PM
PROCESS MARKS IN DISABLED TIRES
Jean-Claude Brico
Forensic Tire Expertise LLC
Paper 23A - 2:10 PM to 2:30 PM
LOCATING PATENT INFORMATION ON THE INTERNET
Chris Laursen
Rubber Division, ACS
Paper 23B - 2:10 PM to 2:30 PM
SETTING THE STANDARD FOR LINERS/"SEPARATORS"
Helen-Marie Berthold
Ehren-Haus
Paper 24A - 2:30 PM to 2:50 PM
NEW CARBON BLACKS FOR TIRE APPLICATIONS
Wesley Wampler, Ph.D.
Sid Richardson
Paper 24B - 2:30 PM to 2:50 PM
ROLLING RESISTANCE TEST PROGRAM (PART 1): CALIFORNIA ENERGY COMMISSION'S FUEL EFFICIENT TIRE PROGRAM (ORAL)
Bruce D. Lambillotte
Smithers Scientific Services, Inc.
Paper 25A - 2:50 PM to 3:10 PM
THE LATEST MEMBER OF CONTINENTAL'S EXTENDED MOBILITY PORTFOLIO: THE NEW SEALANT KIT
Juergen Buschmann
Continental Tire
Paper 25B - 2:50 PM to 3:10 PM
SOME KEY QUESTIONS ABOUT WIRECOAT COMPOUND AGING
Ed Terrill
Akron Rubber Development Laboratories (ARDL)
3:10 PM to 3:20 PM
BREAK
Paper 26A - 3:20 PM to 3:40 PM
RUNFLAT SUMMARY - EXPLOITING ADVANCED COMPOSITES FOR PRESSURIZED AND ZERO PRESSURE OPERATION
Edward Markow, PE
Retired from Grumman/NASA
Paper 26B - 3:20 PM to 3:40 PM
IMPROVED BONDING OF BEAD WIRE TO RUBBER USING SILANE TECHNOLOGY
Paper 27A - 3:40 PM to 4:00 PM
COMPARISON OF AND ISSUES BETWEEN THE SAE ROLLING RESISTANCE TEST RECOMMENDED PRACTICES (PART I)
Paper 27B - 3:40 PM to 4:00 PM
HIGH PERFORMANCE SILICA: PROVIDING VALUE IN ENERGY EFFICIENT TIRES
Pierre-Emmanuel Goutorbe
Rhodia
Paper 28A - 4:00 PM to 4:20 PM
COMPARISON OF AND ISSUES BETWEEN THE SAE ROLLING RESISTANCE TEST RECOMMENDED PRACTICES (PART II)
Paper 28B - 4:00 PM to 4:20 PM
GE'S NEW ETHANOL FREE SILANE FOR SILICA TIRES
Antonio Chaves, Ph.D.
Momentive Performance Materials
Paper 29A - 4:20 PM to 4:40 PM
EFFECT OF DEFORMATION ON AGING OF RUBBERS
Asahiro Ahagon
The Yokohama Rubber Co., Ltd.
Paper 29B - 4:20 PM to 4:40 PM
PROCESSING OF NEW RUBBER SILANE VP Si 363
Oliver Klockmann, Ph.D.
Degussa Corporation
Paper 30A - 4:40 PM to 5:00 PM
AUTOMATIC BEAD/APEX ASSEMBLY
Mike Norman
VMI Americas Inc.
Paper 30B - 4:40 PM to 5:00 PM
PROCESSING INFLUENCES OF ADDITIVES ON A SILICA FILLED TREAD
John Vander Kooi, Ph.D.
Struktol Co. of America
Thursday, September 14th 2006
Paper 31A - 8:30 AM to 8:50 AM
IMPROVE THERMAL AND THERMAL OXIDATIVE AGING RESISTANCE OF RUBBER COMPOUNDS
Paper 31B - 8:30 AM to 8:50 AM
DIRECT MILLING OF TREAD SEGMENTS
Armin Krause, Ph.D.
Dahmen GmbH
Paper 32A - 8:50 AM to 9:10 AM
Q-FLEX QDI QUINONE DIIMINE ANTIDEGRADANT -IMPROVED MIXING CHEMISTRY RESULTING IN A BETTER BALANCE OF PRODUCTIVITY AND PERFORMANCE
Paper 32B - 8:50 AM to 9:10 AM
MIXING PARAMETER EFFECTS
Richard J. Jorkasky II
Kobelco, Stewart and Boling (KSBI)
Paper 33A - 9:10 AM to 9:30 AM
DEVELOPMENT OF THE PETROLEUM FREE TIRE
Mamoru Uchida
Sumitomo Rubber Industries Ltd.
Paper 33B - 9:10 AM to 9:30 AM
HIGH SPEED TIRE UNIFORMITY MACHINE
Toshikatsu Nonaka
Kobelco Stewart Bolling, Inc.
Paper 34A - 9:30 AM to 9:50 AM
PRODUCT AND PROCESS INNOVATION THROUGH INDUSTRY PARTNERSHIP
Joe DePaso, Ph.D.
Intralox
Paper 34B - 9:30 AM to 9:50 AM
GLOBAL TRENDS IN TIRE RAW MATERIALS: NATURAL AND SYNTHETIC RUBBER
William Hyde
Chemical Market Associates, Inc.
Paper 35A - 9:50 AM to 10:10 AM
PLANETRUDER, THE SYNTHESIS OF AN EXTRUDER AND A GEAR PUMP
Florian Fischer
VMI-AZ
Paper 35B - 9:50 AM to 10:10 AM
A COST EFFECTIVE ALTERNATE METHOD FOR THE PRODUCTION OF IMPROVED "PIN VENT HOLES" IN TIRE VULCANIZING MOLDS VIA THE "FAST HOLE" ELECTRICAL DISCHARGE MACHINING PROCESS
Lester McFarland
Beaumont Machine
Paper 36A - 1:15 PM to 2:00 PM
CHINA TIRE INDUSTRY: CURRENT STATUS AND DEVELOPMENT TRENDS OF CHINESE RUBBER MACHINERY
Li Dongping
Guilin Rubber Machinery
Paper 37A - 2:00 PM to 2:45 PM
FUTURE PROSPECTS OF INDIAN AUTOMOTIVE INDUSTRY WITH SPECIAL REFERENCE TO TYRE INDUSTRY
R. Mukhopadhyay, Ph.D.
JK Tyre & Industries Ltd. / HASETRI
2:45 PM to 3:00 PM
BREAK
Paper 38A - 3:00 PM to 3:45 PM
SUSTAINABLE DEVELOPMENT AND INTERNATIONAL COOPERATION OF CHINESE RUBBER INDUSTRY
Ju Hongzhen
CRIA
|
|
updated 9/11/06
SUBMIT A CONFERENCE PAPER
TELL US WHAT YOU WANT AT ITEC 2008
EXHIBIT AND SPONSORSHIP OPPORTUNITIES
|
